Smith & Wesson Model 19-3

This Smith & Wesson Model 19-3 is in excellent condition with a beautiful NICKEL finish. The grips are excellent as evidenced in the pictures. There is no nickel flaking or discolorations on this Smith. There is a minor cylinder turn line that does not affect the performance or looks of the revolver. For additional pictures: https://www.israel-arms.com/SMITH-WESSON-MODEL-19-3-NICKEL-p/9k1027.htm

FEATURES

.357 Magnum
6-inch Barrel
Nickel Finish
Wood Grip Panels
Target Trigger
Target Hammer
Target Sights
Light Cylinder Turn Marks
Original Presentation Case
Manufactured in 1976
No Paperwork
ADDITIONAL INFORMATION

History
The .357 Magnum is the oldest "magnum" handgun cartridge. Smith & Wesson played a major part in the development and success of the cartridge and revolver that went with it. Firearms writer and experimenter Philip Sharpe is credited for its development during the 1930s when police agencies were asking for a more powerful round. S&W's Douglas B. Wesson agreed to produce a new revolver that would handle "high-intensity" .38 Special loads, but only if Winchester would develop a new cartridge. Elmer Keith, a well-known author, and wildcatter at the time was experimenting with handloading .38 Special ammunition beyond their original specifications, taking advantage of the newer and better-designed firearm frames and metallurgy, and also played a major role in the development of the .357 Magnum. Winchester introduced the .357 Magnum, which was dimensionally identical to the .38 Special except for a .125 inch longer case, and the first revolvers (referred to as ".357 Magnum Models") were completed by S&W on April 8, 1935.

Retired Assistant Chief Patrol Inspector of the U.S. Border Patrol, famous gunfighter, and noted firearms and shooting skills writer Bill Jordan consulted with Smith & Wesson on the design and characteristics of the Model 19. Jordan's idea for a "peace officer's dream"] sidearm was a heavy-barreled four-inch K-Frame .357 Magnum with a shrouded barrel like the big N-frame .357 and adjustable sights. After a year of experimentation with improved-strength steels and special heat-treating processes, the result was the .357 Combat Magnum (later designated Model 19), with the first serial-number gun (K260,000) presented to Jordan on November 15, 1955

The .357 Magnum, four-inch barreled model was standard issue to uniformed officers of the former U.S. Immigration and Naturalization Service as well as Patrol Agents of the U.S. Border Patrol until both agencies adopted .40 caliber semi-automatic pistols.

A rare S&W M19-3 was built for the French GIGN. In 1972 they ordered 500 of these revolvers that have serial numbers in the M&P range from D639300 to 639800. With only 500 guns produced, this is the rarest M19 version.

This specific model 19-3 has a fixed sight and is pinned & recessed. It has a three-inch barrel.

Styles
The Model 19 was produced in blued carbon steel or nickel-plated steel with wood or rubber combat grips, an adjustable rear sight, full-target or semi-target hammer, serrated wide target trigger or combat-type trigger, and was available in 2.5" (3": Model 66—rare), 4", or 6-inch barrel lengths. The weights are 30.5 ounces, 36 ounces, and 39 ounces, respectively. The 2.5- and 3-inch barrel versions had round butts, while the others had square butts.

The Model 19 was produced from 1957 (first model number stampings) to November 1999. The Model 66 was produced from 1970 until 2005. The Model 66 differed by its use of stainless steel and its smooth target-type trigger. The Model 68 was a limited-production version of the Model 66 made for the California Highway Patrol and Los Angeles Police Department chambered in .38 Special with a 6" barrel. The Model 19 and the Model 66 had the same trigger options.[2] One of the last variations of the Model 19 ordered for police use was the 2.5" Model 19-5, special-ordered under SKU #100701 as the standard-issue sidearm for Special Agents of the US Department of State's Diplomatic Security Service. This model featured a .400" wide, smooth "combat" trigger, Pachmayr Professional Compac rubber grips, and most notably a matte black finish instead of the common high-polished blue.

Engineering changes were designated with a "dash-" number after the model number. The engineering changes are as follows:]

Model 19 Variants]

4" Model 19-5, polished nickel-plated with woodgrain square grips

2.5" Model 19-5 of the US Diplomatic Security Service, featuring unusual matte black finish
Model Year Modifications
19 1957 Introduction
19-1 1959 Change extractor rod, right to left-hand thread
19-2 1961 Cylinder stop changed, deleted trigger guard screw
19-2 1963 Introduce 6" barrel
19-2 1963 50 manufactured with 2.5" barrel, serial range K544672–K544721
19-2 1966 Introduce 2.5" barrel as standard
19-3 1967 Relocation of rear sight leaf screw
19-3 1968 Delete diamond-insert grip
19-4 1977 Change gas ring from yoke to the cylinder
19-5 1982 Eliminate cylinder counterbore and pinned barrel; a small change in cylinder length to 1.62"
19-6 1988 New yoke retention system; radius stud package; floating hand; hammer nose bushing.
19-6 1992 Blue finish only is cataloged
19-7 1994 Add Uncle Mike's Combat synthetic grips; drill and tap frame; change extractor; change rear sight leaf
19-7 1995 Delete square butt
19-7 1996 Discontinue 6" barrel production; begin shipments in blue foam-filled plastic cases
19-7 1997 Change to MIM thumbpiece and trigger, ship with trigger locks
19-8 1998 Change frame design, eliminate cylinder stop stud, serrated tangs
19-8 1998 Add internal lock, add MIM hammer w/ floating firing pin
19-8 1999 Discontinue 2.5” barrel
19-9 2018 Reintroduced with 4.25” barrel and Performance Center Carry Comp with 3” barrel